How does bitcoin mining work

Bitcoin Mining Guide — Getting started with Bitcoin mining

Bitcoin mining is difficult to do profitably but if you try then this Bitcoin miner is probably a good shot.

How Bitcoin Mining Works

Before you start mining Bitcoin, it’s useful to understand what Bitcoin mining really means. Bitcoin mining is legal and is accomplished by running SHA256 double round hash verification processes in order to validate Bitcoin transactions and provide the requisite security for the public ledger of the Bitcoin network. The speed at which you mine Bitcoins is measured in hashes per second.

The Bitcoin network compensates Bitcoin miners for their effort by releasing bitcoin to those who contribute the needed computational power. This comes in the form of both newly issued bitcoins and from the transaction fees included in the transactions validated when mining bitcoins. The more computing power you contribute then the greater your share of the reward.

Sometimes you may want to mine a more volatile altcoin like MWC which is superior for scalability, privacy, anonymity and fungibility by utilizing MimbleWimble in the base layer.

With mainnet launching in November 2019 it has risen from $0.22 to over $8.00 in its first two months.

Step 1 — Get The Best Bitcoin Mining Hardware

Purchasing Bitcoins — In some cases, you may need to purchase mining hardware with bitcoins. Today, you can purchase most hardware on Amazon. You also may want to check the bitcoin charts.

How To Start Bitcoin Mining

To begin mining bitcoins, you’ll need to acquire bitcoin mining hardware. In the early days of bitcoin, it was possible to mine with your computer CPU or high speed video processor card. Today that’s no longer possible. Custom Bitcoin ASIC chips offer performance up to 100x the capability of older systems have come to dominate the Bitcoin mining industry.

Bitcoin mining with anything less will consume more in electricity than you are likely to earn. It’s essential to mine bitcoins with the best bitcoin mining hardware built specifically for that purpose. Several companies such as Avalon offer excellent systems built specifically for bitcoin mining.

Best Bitcoin Cloud Mining Services

Another option is to purchase in Bitcoin cloud mining contracts. This greatly simplifies the process but increases risk because you do not control the actual physical hardware.

Being listed in this section is NOT an endorsement of these services. There have been a tremendous amount of Bitcoin cloud mining scams.

Hashflare Review: Hashflare offers SHA-256 mining contracts and more profitable SHA-256 coins can be mined while automatic payouts are still in BTC. Customers must purchase at least 10 GH/s.

Genesis Mining Review: Genesis Mining is the largest Bitcoin and scrypt cloud mining provider. Genesis Mining offers three Bitcoin cloud mining plans that are reasonably priced. Zcash mining contracts are also available.

Hashing 24 Review: Hashing24 has been involved with Bitcoin mining since 2012. They have facilities in Iceland and Georgia. They use modern ASIC chips from BitFury deliver the maximum performance and efficiency possible.

Minex Review: Minex is an innovative aggregator of blockchain projects presented in an economic simulation game format. Users purchase Cloudpacks which can then be used to build an index from pre-picked sets of cloud mining farms, lotteries, casinos, real-world markets and much more.

Minergate Review: Offers both pool and merged mining and cloud mining services for Bitcoin.

Hashnest Review: Hashnest is operated by Bitmain, the producer of the Antminer line of Bitcoin miners. HashNest currently has over 600 Antminer S7s for rent. You can view the most up-to-date pricing and availability on Hashnest’s website. At the time of writing one Antminer S7’s hash rate can be rented for $1,200.

Bitcoin Cloud Mining Review: Currently all Bitcoin Cloud Mining contracts are sold out.

NiceHash Review: NiceHash is unique in that it uses an orderbook to match mining contract buyers and sellers. Check its website for up-to-date prices.

Eobot Review: Start cloud mining Bitcoin with as little as $10. Eobot claims customers can break even in 14 months.

MineOnCloud Review: MineOnCloud currently has about 35 TH/s of mining equipment for rent in the cloud. Some miners available for rent include AntMiner S4s and S5s.

Bitcoin Mining Hardware Comparison

Currently, based on (1) price per hash and (2) electrical efficiency the best Bitcoin miner options are:

Источник

How Does Bitcoin Mining Work?

In traditional fiscal system, governments and banks can (and do) issue more money whenever they want to. However, no one can do that in Bitcoin, since the money issuance process revolves around mining — an extremely clever process of confirming Bitcoin transactions and recording them on a decentralized ledger at the same time.

But how does Bitcoin mining work? In this guide, we dive into the fundamentals of Bitcoin mining and the key processes behind it.

What is Bitcoin mining?

Bitcoin mining can be defined as a process of “discovering” bitcoins. Much like gold, bitcoins are artificially limited, and there can never be more than 21 million BTC. Also, like gold, you need to allocate resources and hard work to extract it. However, unlike mining gold, bitcoins are designed to be minted using the computational power of millions of competing computers from all over the world.

It may be tricky to wrap your head around it at first, but in fact, it is quite genius. Everyone is free to run a Bitcoin node and try their luck at mining, but no one is guaranteed to be profitable at it. However, these millions of computers ensure one thing — the functionality and security of the network.

If you want to dive deeper into the topic of “what is bitcoin mining,” see our namesake guide.

For now, all you need to know is that Bitcoin mining serves multiple purposes:

1. Secures the Bitcoin network.
2. Incentivizes the miners to allocate their resources to the Bitcoin network.
3. Confirms Bitcoin transactions.
4. Ensures the decentralization of Bitcoin (which makes it free global peer-to-peer (P2P) money).
5. Makes bitcoins scarce and hard to get.
6. Penalizes bad actors in the network by making it unprofitable to go against the system.

How does mining work?

People can send bitcoins (or any other digital assets) all the time, but it doesn’t mean much unless someone keeps tabs on all of them. This is especially true with digital assets which are super easy to copy. So to have a fully functioning digital cash you need to keep a record on who paid what and to whom, and that’s essentially what banks do for us.

But how do we know that person A has sent bitcoins to person B if there are no organizations to oversee it? How do we prevent double-spending where person A sends the same bitcoins to person C?

The answer is Bitcoin mining.

The Bitcoin network replaces banks and other intermediaries by processing all the network transactions, putting them into a list, and locking them up into immutable blocks. Eventually, it’s the miners who do all the work — allocate their hashing power to confirm those transactions and record them into a distributed public ledger.

Bitcoin mining requires a computer and special Bitcoin program (client). When you install Bitcoin client on your computer, you become a miner and can compete with rival miners in solving complex math puzzles. Every ten minutes, all computers try to solve a block with the latest transaction data in it using cryptographic hash functions.

What are bitcoin hashes?

Every solved block is added to the public ledger. Essentially, the distributed public ledger consists of a long list of blocks which make up the Bitcoin blockchain.

The Bitcoin distributed ledger aka blockchain is a public record of all the transactions that took place on the network. Since the file is public, it can be explored by anyone using any bitcoin block explorer. A new block is added to the ledger approximately every 10 minutes. Therefore, the blockchain size is continuously increasing. An updated copy on a new block is shared between miners, so everyone always knows what’s going on.

Now, what purpose does that serve?

In traditional systems, a ledger must be trusted, meaning that there has to be a trusted person or entity which oversees it and guarantees no one tampers with it. In the Bitcoin network, that role is played by the miners.

When a block of transactions is ready, the miners need to process it. They apply the SHA-256 Cryptographic Hash Algorithm to turn into a seemingly random sequence of numbers and letters known as a hash. The hash is stored together with the block at the end of the blockchain at that particular point in time, which serves as a proof of work and validation.

Bitcoin mining \»farm.\» Source: Wikipedia Commons.

But how are these hashes so reliable?

Well, it’s easy to make a hash out of data included in the Bitcoin block. However, it is practically impossible to decrypt the data just by looking at the hash because it is entirely random and each hash is unique. If you change even one symbol in the original input, you will get an entirely different hash. Therefore, it is completely impossible to predict the output and the only way to match it is by blind guessing, which is what miners do.

Nevertheless, the miners don’t merely wrap the transactions into hashes but use some other pieces of data, too. One of these pieces is the hash of the last block.

Since each block’s hash contains the hash of the previous block, it works as like a digital a wax seal. It guarantees that the produced block, as well as every block before it, is legitimate. If the block is falsified, other miners can see it and reject it.

In other words, a fake transaction would change a block along with its original hash. Since each block’s hash is used to create the next block’s hash, that would affect all blocks on the chain. So if someone checked it, they would immediately notice the difference between correct and false blocks since they don’t match the ones already verified on the blockchain.

That’s how miners “seal off” a block. Now let’s have a look at the competition part.

Bitcoin \»mining.\» Source: Freepik.com

Competing for coins

We’ve already established that the only way to seal off a block is to guess the output of the hash correctly, and the most efficient way to do so is random guessing done by computers.

All miners compete with each other who can guess it faster using the mining software. The miner who is first to do this mines the block (which takes billions of random computer-generated guesses from all over the world) and reaps the block reward which is currently set at 12.5 BTC per block and decreases by half every 210,000 blocks. At the current rate, it means the block reward will fall to 6.25 BTC per block sometime in 2021.

Essentially, it serves as an incentive to keep on mining to keep the system working. Since the block rewards are continually decreasing, it is expected BTC price will continue to appreciate. However, block rewards aren’t the only incentive mechanism for the miners, as they also share the collective Bitcoin transaction fees.

Check out this guide to learn more about the value of bitcoins.

Источник

How Bitcoin mining really works

by Subhan Nadeem

How Bitcoin mining really works

As Bitcoin approaches mainstream adoption and recognition, its fundamental security model, characterized as mining, is being put under the spotlight and scrutinized more and more everyday.

People are increasingly concerned about and interested in the environmental impact of Bitcoin mining, the security and degree of decentralization of the underlying model, and even the potential impact of a quantum computing breakthrough on the future of Bitcoin and other cryptocurrencies.

Often times, proof-of-work is described as a “cryptographic puzzle,” but what is that puzzle, really?

In order to truly understand these questions (and any possible answers), you need to have a fundamental understanding Bitcoin mining itself and its evolution.

This article will explore all the technical components and moving parts of proof-of-work, and how they seamlessly synchronize with one another to allow Bitcoin to be the decentralized platform it is today.

Why Mining Works: Cryptographic One-Way Hashing

The Bitcoin blockchain is often described as a database that is cryptographically secure and, subsequently, immutable. The underlying technology that powers this immutability and security is cryptographic hashing.

A cryptographic hash function is a mathematical function that, simply put, takes any input and maps it to a fixed-size string.

However, there are four special properties of these functions that make them invaluable to the Bitcoin network. They are:

1. Deterministic — for any input into the cryptographic hash function, the resulting output will always be the same.
2. Fast — Computing the output of the hash function, given any input, is a relatively fast process (doesn’t need heavy computation)
3. Unique — Every input into the function should result in a completely random and unique output (in other words, no two inputs result in the same output)
4. Irreversible — Given an output of a hash function, the original input is unable to be obtained

These rules provide the foundation that enables Bitcoin mining to secure the network.

In particular, the creator of the Bitcoin protocol, Satoshi Nakomoto, chose to use the SHA-256 hash function as the basis for Bitcoin mining. This is a specific cryptographic hash function that has been mathematically proven to hold the above properties. It always outputs a 256 bit number (the most basic unit of computation), which is usually represented in the hexadecimal number system with 64 characters for human-readability.

The output of the SHA-256 function is usually referred to as the hash of its input.

A hash function’s input results in a completely unique output

Here is an example of a SHA-256 function input and output (you can try it out yourself here):

Interestingly enough, in the majority of places where hashing is used in the Bitcoin protocol, double hashing is used. This means that the output of the original SHA-256 function is then put right back into the SHA-256 function to obtain another output. Here is what that process looks like:

Double hashing is used to safeguard against birthday attacks. A birthday attack is a scenario where an attacker is able to produce the same hash as another input by using a completely different input (called a collision). This breaks the third property of uniqueness. Without it, two completely different Bitcoin blocks may be represented by the exact same hash, allowing attackers to potentially switch out blocks.

With the SHA-256 function, the probability of this attack happening is infinitely small. If it wasn’t close to impossible, SHA-256 would be considered broken.

However, other hash functions have been “broken” in the past. In order to safeguard against this happening to SHA-256 in the future (and effectively breaking the security model of Bitcoin) it’s best to hash the hash. This halves the probability of a collision occurring, making the protocol that much more secure.

At a very high level, Bitcoin mining is a system in which all Bitcoin transactions are sent to Bitcoin miners. Miners select one megabyte worth of transactions, bundle them as an input into the SHA-256 function, and attempt to find a specific output the network accepts. The first miner to find this output and publish the block to the network receives a reward in the form of transaction fees and the creation of new Bitcoin.

Let’s take things a step further and dive into the Bitcoin blockchain itself to see what exactly it is that miners do to make the network secure.

Bitcoin Mining: A Technical Introduction

Mining was introduced as the solution to the double-spend problem. If I have 1 Bitcoin and I send it to Bob, and then try sending that same Bitcoin to Alice, the network ensures that only one transaction will be accepted. It does this through the well-known process called mining.

Before diving into the technical details, its important to understand why mining is necessary to secure the network. As fiat currency exists now, the currency we hold is created and validated by a federal reserve. Because Bitcoin operates under the rigid assumption of decentralization and consensus, no central authority can exist that validates and time-stamps the issuance of that currency and validation of any transactions that occur with that currency.

Satoshi Nakamoto proposed the only known solution at the time to solving this validation problem in a consensus-oriented system. Titled in the Bitcoin whitepaper as proof-of-work, this scheme elegantly justifies that transactions are validated by those who are willing to expend enough physical computational energy and time to do so, while simultaneously introducing an incentive to induce market competition. This competition enables the property of decentralization to emerge and thrive organically within the ecosystem.

A Look Inside a Block

A Bitcoin block consists primarily of two components:

1. Transactions, in the form of a merkle tree

Mining computers collect enough transactions to fill a block and bundle them into a merkle tree.

A merkle tree is a relatively simple concept: transactions lie at the bottom of the tree as leaves and are hashed using the SHA-256 function. The combination of two leaf transactions are hashed again using the SHA-256 function to form a parent of the leaves. This parent is continuously hashed upwards in combination with other parents of hashed transactions, until a single root is created. The hash of this root is effectively a unique representation of the transactions that are underneath it.

A visualization of how a merkle tree is built — the leaves at the very bottom of the tree are transactions

The root of the merkle tree is a combination of the hashes of every transaction in the tree.

Recall that for any any input to a hash function, the output is entirely unique. Therefore, once most nodes on the network receive a mined block, the root of the merkle tree hash acts as an unchangeable summary of all the transactions in that given block.

If a malicious actor were to try and change the contents of a transaction in a block, its hash would be changed. This change of a hash would be propagated up the transaction’s merkle tree until the hash of the root is changed. Any node can then quickly catch this malicious act by comparing the root of the changed block’s merkle tree to that of a valid block’s merkle tree.

2. The block header

The block header is a summary of the contents of the block itself. It contains the following six components:

• The version of software the Bitcoin client is running
• The timestamp of the block
• The root of its containing transactions’ merkle tree
• The hash of the block before it
• A nonce
• The target

Remember that the root of the transaction merkle tree acts as an effective summary of every transaction in the block without having to look at each transaction.

The hash of the previous block before it allows the network to properly place the block in chronological order. This is where the term blockchain is derived from — each block is chained to a previous block.

The nonce and target are what make mining tick. They are the basis for solving the SHA-256 puzzle that miners need to solve.

Please note that all of this data in the block header is compressed into 80 bytes using a notation called little-endian, making the transfer of block headers between nodes a trivially efficient process. For the purposes of this explanation, we’ll ignore this compression and assume data is in its original form.

Explaining the Mining Problem

The target stored in the block header is simply a numeric value stored in bits. In traditional base 10 notation, this target ranges anywhere between 0 to somewhere in the range of 2²²⁴ (a 67+ digit number), depending on how many miners are competing to solve this problem at the same time.

Recall that the output of SHA-256 is just a number. The goal of a miner is to take the current block’s header, add a random number to it called the nonce, and calculate its hash. This numeric value of the hash must be smaller than the target value.

That’s all there is to it. But it’s much easier said than done.

Recall the first property of SHA-256: an input into a hash function will always result in the same output. Therefore, if the miner took the block header, hashed it, and realized that the hash value wasn’t less than the target, they would have to change the input somehow in order to try finding a hash below the target value.

This is where the nonce comes in.

The miner adds a number (starting from 0), called the nonce, to the block header, and hashes that value. If the hash value isn’t less than the target, the miner will increment the nonce by 1, add it again to the block header, and hash that changed value. This process is repeated continuously until a hash less than the target value is found.

A Mining Example

Here’s a rough approximation of what made up the first block header:

• The merkle root of the transaction in the Genesis block:

• The first known Bitcoin version: 0.1.0
• The timestamp of the block: 2009–01–03 18:15:05
• The target (this is also the highest the target will ever be):

• No previous block hash — this was the first block, and so this is a unique case

The final block header after adding its components together:

The Genesis block data (this includes the nonce, but lets pretend it doesn’t), source: bitcointalk

Let’s take this large header and compute the double-hash:

Both the target and the output hash are incredibly large numbers when converted to base 10 (remember, over 67 digits long). Instead of trying to demonstrate the comparison of the two here, the following Python function handles the comparison instead:

True is returned if the hash is less than the target, false otherwise.

Here is the result with our target and block hash:

Now we take the original block hexadecimal value and add 1 to it. Here is the following result:

Notice how the very last digit is now 1, due to the addition of the nonce

We then run the same hashing algorithm and comparison on this changed data. If its not below the target, keep repeating.

Once a successful hash is found, the latest nonce used to find this solution is saved within the block.

This means Satoshi Nakomoto iterated through this process over 2 billion times before he found a hash that was acceptable.

I’ve written a small Python implementation of this Genesis block mining process that can be found on my GitHub.

See how long it would take for you to successfully mine the Genesis block!

A Caveat: extraNonce

The nonce value in a block header is stored as a 32-bit number. This means that the highest nonce anybody is able to achieve is 2³² (approximately 4 billion). After 4 billion iterations, the nonce is exhausted, and if a solution is not found, miners are once again stuck.

The solution to this is to add a field to the coinbase (the transaction contents of a block, stored as the merkle tree) called the extraNonce. The size of this extraNonce is only limited by the size of block itself, and so it can be as large as miners wish as long as the block size is within protocol limits.

If all 4 billion possible values of the nonce are exhausted, the extraNonce is added and incremented to the coinbase. A new merkle root and subsequently new block header are calculated, and the nonce is iterated over once again. This process is repeated until a sufficient hash is found.

It’s best to avoid adding the extraNonce until the nonce is exhausted, because any change to the extraNonce changes the merkle tree. This requires extra computation in order to propagate the change upwards until a new root of the merkle tree is calculated.

The Miner Reward

A miner who successfully publishes a block the fastest is rewarded brand new Bitcoin, created out of thin air. That reward currently stands at 12.5 BTC. Just how do these Bitcoins come into existence?

Each miner simply adds a new output transaction to their block that attributes 12.5 Bitcoins to themselves before beginning to mine the block. The network protocol will accept this special transaction as valid upon receiving a newly validated block. This special transaction is called a generation transaction.

Its the miner’s responsibility to add this transaction into the block before mining it. There has been at least one case where miners forgot to add the reward to the transaction before mining a block, effectively destroying 12.5 BTC!

Validating Proof-of-Work

Let’s say our miner has found a hash that is less than the target. All this miner has to do is publish the mined block with the original six components to any connected nodes.

This node receiving the block will first verify the transaction set, ensuring all transactions are valid (for example, all transactions are appropriately signed, and coins aren’t being double-spent and/or being created out of thin air).

It will then simply double-hash the block header and ensure the value is below the block’s included target value. Once the block is deemed valid, the new node will continue to propagate this block across the network until every node has an up-to-date ledger.

As you can see, newly published blocks can easily be verified by any given node. However, publishing a valid block to the network requires an incredibly large amount of computational power (thus, electricity and time). This asymmetry is what allows the network to be secured while simultaneously allowing individuals who wish to conduct economic activity on the network to do so in a relatively seamless manner.

The Block Time and Adjusting the Target

As the first miners began mining, they each monitored the block time. Each Bitcoin block has a set block time of 10 minutes. What this means is that given the current level of computing power (network hashrate) on the network, nodes will always expect newly validated blocks to be produced every 10 minutes on average.

We can reasonably expect blocks to be produced within 10 minutes because the probability of finding a block, given the network hashrate, is known.

For example, let’s take the easiest target that’s ever existed in Bitcoin: the genesis block. The probability of any single hash being less than the easiest target is 1 in 2³². That’s one in over four billion. Therefore, we can reasonably expect somebody to run 2³² iterations of the mining problem in order to find a proper hash. Nodes on the network expected four billion of these iterations to be run across all miners on the network every 10 minutes.

If, over a large sample size of blocks, blocks start appearing faster than 10 minutes, this is a pretty clear indication that nodes on the network are iterating through four billion hashes much faster than 10 minutes. This situation prompts every node to adjust the target proportionally based on the increase (or decrease) in network power to ensure blocks continue to be produced every 10 minutes.

In actuality, nodes on the network monitor the block time across 2016 blocks, which comes out to exactly two weeks. Every two weeks, the total block time is compared to the expected block time (which is 20160 minutes).

To obtain the new target, simply multiply the existing target by the ratio of the total actual block time over the last two weeks to get the expected block time. This will adjust the target proportionally to the amount of entering or exiting computing power on the network.

The formula to calculate the new target, run every 20160 minutes (two weeks) by each Bitcoin node

The block time and the ability to easily calculate the probability of finding a valid block lets nodes easily monitor and determine the total hashpower on the network and adjust the network. No matter how much computing power is added to the network or how quickly its added, on average the block time will always remain at 10 minutes.

The current total hash rate on the network is 28.27 exahash per second. That’s 28.27 x 10¹⁸ hashes run every second across all computers on the network.

In summary

We have now comprehensively covered the following:

• Why cryptographic one way hashing is vital to proof-of-work
• A breakdown of the construction of a Bitcoin block
• The actual mining process and iteration itself
• How nodes can easily validate other blocks
• How the network manages to maintain the algorithm and competitiveness by monitoring the block time and adjusting the target

You should now be able to understand and explain how proof-of-work actually functions and why it is considered to be an entirely secure algorithm that enables decentralization and consensus!

Follow me on Twitter and Medium if you’re interested in more in-depth and informative write-ups like these in the future!

If this article was helpful, tweet it.

Learn to code for free. freeCodeCamp’s open source curriculum has helped more than 40,000 people get jobs as developers. Get started

freeCodeCamp is a donor-supported tax-exempt 501(c)(3) nonprofit organization (United States Federal Tax Identification Number: 82-0779546)

Our mission: to help people learn to code for free. We accomplish this by creating thousands of videos, articles, and interactive coding lessons — all freely available to the public. We also have thousands of freeCodeCamp study groups around the world.

Donations to freeCodeCamp go toward our education initiatives and help pay for servers, services, and staff.

Источник